Win4K4Suite Release Notes

Win4K4Suite Version 1.380, October 6th, 2024

Installation

This release requires .NET 4.8 or later. In most cases this will already be installed if you allow Windows Update on Windows 10 and Windows 7 and 8. However if not, when you start the install, Windows will automatically download and install the latest release of .NET. It will then reboot your computer.

If your computer was rebooted, you will need to run the installation of Win4K4Suite again. That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation. You can uninstall previous releases at any time using the Windows control panel.

When you install a new release of Win4K4Suite, it is installed in a new folder. The old version is not automatically removed. The installation will also create new shortcuts so be sure to use the correct ones for the new version. When you are happy with the new release, just uninstall the old version using the Windows control panel.

Updated

The EiBi shortwave database has been updated
A few improvements were made in some low level code.

Win4K4Suite Version 1.374, September 23, 2024

Installation

This release requires .NET 4.6 or later. In most cases this will already be installed if you allow Windows Update on Windows 10 and Windows 7 and 8. However if not, when you start the install, Windows will automatically download and install the latest release of .NET. It will then reboot your computer.

If your computer was rebooted, you will need to run the installation of Win4K4Suite again. That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation. You can uninstall previous releases at any time using the Windows control panel.

New

Added the ability to Import and Export the Radio Menu settings. (Tools, Radio Menu Settings)
Added a frequency memory facility. (Tools, Windows, K4 Frequency Memories)

Updated

The EiBi shortwave database has been updated

Win4K4Suite Version 1.372, August 12, 2024

Installation

If your computer was rebooted, you will need to run the installation of Win4K4Suite again. That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation. You can uninstall previous releases at any time using the Windows control panel.

New

Added support for XBox controllers. This can be used with the new windows gaming PC’s for easy remote control. You can see a demo here.

Updated

The EiBi shortwave database has been updated

Win4K4Suite Version 1.356, May 27, 2024

Installation

If your computer was rebooted, you will need to run the installation of Win4K4Suite again. That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation. You can uninstall previous releases at any time using the Windows control panel.

Updated

The Tune and Low power tune have been modified in Bypass mode to start and stop by pressing the corresponding button. There is no longer a time out.
The EiBi shortwave database has been updated

Win4K4Suite Version 1.354, April 12, 2024

Installation

If your computer was rebooted, you will need to run the installation of Win4K4Suite again. That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation. You can uninstall previous releases at any time using the Windows control panel.

Updated

Updated the RIT/XIT to use increments of 10Hz with the mouse wheel.
It is no longer necessary to use simple passwords for the ClubLog access.
On some systems, a missing voice for Microsoft Speech caused an error.

Win4K4Suite Version 1.352, April 6, 2024

Installation

If your computer was rebooted, you will need to run the installation of Win4K4Suite again. That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation. You can uninstall previous releases at any time using the Windows control panel.

Updated

Updated the EiBi shortwave database.
Added the ability to enable or disable the KPOD in Tools, Settings (First page)

Win4K4Suite Version 1.350, January 12, 2024

Installation

If your computer was rebooted, you will need to run the installation of Win4K4Suite again. That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation. You can uninstall previous releases at any time using the Windows control panel.

Updated

It was reported that the spectrum for the sub receiver was not showing spots. This was corrected.
Updated the EiBi shortwave database.

Win4K4Suite Version 1.346, November 24,2023

Installation:

If your computer was rebooted, you will need to run the installation of Win4K4Suite again. That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation. You can uninstall previous releases at any time using the Windows control panel.

Updated

The remote paddle functionality in the CW terminal has been updated. For more information see here.

Win4K4Suite Version 1.340, November 15,2023

Installation:

If your computer was rebooted, you will need to run the installation of Win4K4Suite again. That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation. You can uninstall previous releases at any time using the Windows control panel.

New

Added the ability to send remote CW using a WinKey and paddle in the CW terminal. More information can be found here.
There is now an automatic configuration of the HRD Logbook

Updated

The EiBi shortwave database has been updated
The compression meter was not working.

Win4K4Suite Version 1.330, October 6,2023

Installation:

If your computer was rebooted, you will need to run the installation of Win4K4Suite again. That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation. You can uninstall previous releases at any time using the Windows control panel.

New

Added different preset labels for the TX equalizer
The APF control now supports the narrow, medium and wide widths
Added the TX monitor menu item
Added the QSK menu item

Updated

The EiBi shortwave database has been updated

Win4K4Suite Version 1.322, August 12,2023

Installation:

If your computer was rebooted, you will need to run the installation of Win4K4Suite again. That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation. You can uninstall previous releases at any time using the Windows control panel.

Updated

The Mic gain control had the wrong range
The EiBi shortwave database has been updated

Win4K4Suite Version 1.320, July 12,2023

Installation:

If your computer was rebooted, you will need to run the installation of Win4K4Suite again. That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation. You can uninstall previous releases at any time using the Windows control panel.

Updated

VFO B spectrum scale was corrected.
There was an issue with the passbands on 6m
The VFO displays were not correct in transmit mode when using RIT/XIT

Win4K4Suite Version 1.314, June 8, 2023

Installation:

If your computer was rebooted, you will need to run the installation of Win4K4Suite again. That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation. You can uninstall previous releases at any time using the Windows control panel.

Updated

The RF power label was not updating
Closing the spectrum control panel; occasionally gave a fault
The name resolution of the K4-SNxxxxx and K4-SNxxxxx.local was defaulting to IPV6. This will now work
Peaks were not clearing in the PAN B spectrum when selected and unselected.

Win4K4Suite Version 1.312, April 26, 2023

Installation:

If your computer was rebooted, you will need to run the installation of Win4K4Suite again. That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation. You can uninstall previous releases at any time using the Windows control panel.

New

Added the ability to select filters for the noise blanker. Pressing the NB button will toggle between no filter, narrow and wide filters.

Updated

Minor updates

Win4K4Suite Version 1.310, March 26, 2023

Installation:

If your computer was rebooted, you will need to run the installation of Win4K4Suite again. That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation. You can uninstall previous releases at any time using the Windows control panel.

New

Added one line and three line display for the CW terminal on the radio itself.
Changed the way that RIT and XIT work. The VFO A and B readouts now reflect the actual frequency in use while these are operational.

Updated

Changed the tune timeouts.
Corrected the slow RIT tuning
Fixed an issue with tuning the KPA1500.

Win4K4Suite Version 1.300, January 27, 2023

Installation:

If your computer was rebooted, you will need to run the installation of Win4K4Suite again. That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation. You can uninstall previous releases at any time using the Windows control panel.

New

Added voice synthesis for the visually impaired. This is a custom implementation that allows use of the software sight unseen. The initial release works with the full size control window (not the mini screen), the first page of the settings, and the Radio Menu Items screen. Please read more about this here: Accessibility for the visually impaired. Speech may be enabled in the Tools Settings menu.

Updated

When using the KPOD, for transverters, the plus and minus keys did not select the correct digit.
The tuning increment for the KPOD is now saved.
Fixed the error received when opening the bandmaps screen in the CLubLog window.
Fixed the changed link to the DXCC chart
Various other items

Win4K4Suite Version 1.292, January 2, 2023

Installation:

If your computer was rebooted, you will need to run the installation of Win4K4Suite again. That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation. You can uninstall previous releases at any time using the Windows control panel.

Updated

Modified the M1-M4 buttons to output the equivalent of pressing the M1-M4 buttons on the radio when in CW, FSK and PSK modes.
Fixed an issue with the ClubLog access due to changes on the CLubLog server.
The grid marks in the spectrum scope now line up with the scale.
Fixed the saving of the last zoom levels.

Win4K4Suite Version 1.290, December 15, 2022

Installation:

If your computer was rebooted, you will need to run the installation of Win4K4Suite again. That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation. You can uninstall previous releases at any time using the Windows control panel.

Updated

Fixed the use of transverters. Right clicking on the transverter button will give a list of the 12 possible transverters. This now works correctly with the K-POD as well.

Win4K4Suite Version 1.282, November 11, 2022

Installation:

Please see the previous release note.

Fixed:

Use of the Miniscreen lead to some strange occurrences with the MiniPan displays. This has been fixed.
Adjusted the dBm scale to more closely correspond to the radio scale.

Note: If you ever use Pan B, make sure the Sub radio is on. Otherwise there are some situations where MiniPan A will not show up. This is not from the software but rather happens on the radio itself without any software running.

Win4K4Suite Version 1.280, November 8, 2022

Installation:

If your computer was rebooted, you will need to run the installation of Win4K4Suite again. That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation. You can uninstall previous releases at any time using the Windows control panel.

New:

Added MiniPan A and MiniPan B

Win4K4Suite Version 1.276 October 26, 2022

Installation:

If your computer was rebooted, you will need to run the installation of Win4K4Suite again. That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation. You can uninstall previous releases at any time using the Windows control panel.

Fixed:

Fixed the cursor offset in the spectrum for CW signals

Win4K4Suite Version 1.274 October 25, 2022

Installation:

If your computer was rebooted, you will need to run the installation of Win4K4Suite again. That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation. You can uninstall previous releases at any time using the Windows control panel.

New:

Added the Panadapter bandwidth management allowing reduced network utilization. Make sure you have the latest K4 beta firmware.

Win4K4Suite Version 1.272 October 22, 2022

Installation:

If your computer was rebooted, you will need to run the installation of Win4K4Suite again. That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation. You can uninstall previous releases at any time using the Windows control panel.

New:

Added M1 – M8 DVR memories.
Added Spectrum Frames per Second to the spectrum control panel. This can reduce bandwidth for slow connections. Default is 15 fps.
Added the Manual notch functionality to the Audio Spectrum window. Clicking in the waterfall will notch out the offending signal.

Fixed:

Quick memories M1 – M4 have been fixed and have been moved to the VFO panel. (QM1 – QM4). Right clicking of these buttons saves the current frequency.

Win4K4Suite Version 1.270 October 16, 2022

Installation:

If your computer was rebooted, you will need to run the installation of Win4K4Suite again. That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation. You can uninstall previous releases at any time using the Windows control panel.

Fixed:

Band edge markers were not showing
The passband on FSK and AFSK modes was not displayed correctly when the Mark Tone was changed
You can now change the span directly on the radio
Several bug fixes were applied.

Win4K4Suite Version 1.268 October 13, 2022

Installation: Please see the previous version below

Fixed:

The TX Mon level was set to a wrong maximum value. This could create issues with the spectrum if set higher than the old maximum.
Long transmissions could result in a loss of the K4 Spectrum network connection.

Todo:

Check the use of Host names for the K4 connection. Currently it only accepts IP addresses.
Investigate setting the span on the radio. Currently you should only change the span from the Win4K4 panadapter.
Implement a refresh rate for the Panadapter for metered IP connections.

Win4K4Suite Version 1.260 October 12, 2022

Installation:

If your computer was rebooted, you will need to run the installation of Win4K4Suite again. That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation. You can uninstall previous releases at any time using the Windows control panel.

New:

This release supports the dB/Bin panadapter functions of the Elecraft K4. To use this you must have the latest beta firmware installed on your radio. That is version R31.B2 or higher. It will not work with lower firmware revisions and has not been tested with lower revisions.
To use the panadapter functions you must be connected to the K4 with an Ethernet connection.
Once you are using the panadapters, do not change the span directly on the radio. It is not needed and will produce erroneous results.
This video will show you how to use the panadapter.

Win4K4Suite Version 1.18 March 25, 2022

Installation:

If your computer was rebooted, you will need to run the installation of Win4K4Suite again. That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation. You can uninstall previous releases at any time using the Windows control panel.

Fixed:

If you do NOT have a K-POD you will need this release if you updated to 1.16. There is a memory leak which will show up if you do NOT have a K-POD on your system.

Win4K4Suite Version 1.16 March 17, 2022

Installation:

If your computer was rebooted, you will need to run the installation of Win4K4Suite again. That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation. You can uninstall previous releases at any time using the Windows control panel.

New:

Added support for the Elecraft KPOD. All that you need to do is plug it in. There is no configuration necessary. The buttons F1 to F8 correspond to the Function Key macros in Win4K4Suite. You can change the tuning increment using the + and – keys on your keyboard.
Updated the EiBi Shortwave database.

Fixed:

The mini screen macro file was not being loaded fully. To fix this, you need to go into the Tools, Settings macro tab and load your macro file even if it was already loaded. After this this will no longer be required.
Added a heartbeat to the ClubLog screen where it will keep the network open while running. Without this, there was a disconnect somewhere between 8 and 24 hours of use.

Win4K4Suite Version 1.14 February 20, 2022

Installation:

If your computer was rebooted, you will need to run the installation of Win4K4Suite again. That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation. You can uninstall previous releases at any time using the Windows control panel.

New:

Added support for any Jog Shuttle wheel that can generate Function key keyboard strokes. F9 and F10 will decrease and increase frequency, and the Keypad + and – will cycle through the digits in the VFO.
Added the TX Monitor / Line out function. Right click in the transmit section in the program.
Updated the EiBi Shortwave database.

Fixed:

HRDLogbook.exe was not functioning correctly.
Macros containing KPA1500 commands were not executed. This however, cannot be tested here since I do not have a KPA1500.

Win4K4Suite Version 1.10 January 25, 2022

Installation:

If your computer was rebooted, you will need to run the installation of Win4K4Suite again. That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation. You can uninstall previous releases at any time using the Windows control panel.

Fixed:

If one never had Win4K3Suite (for the Elecraft K3( installed then the ClubLog window was not working.

Win4K4Suite Version 1.08 January 19, 2021

Installation:

If your computer was rebooted, you will need to run the installation of Win4K4Suite again. That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation. You can uninstall previous releases at any time using the Windows control panel.

New:

The EiBi shortwave database has been updated
There are now dropdowns for the various antennas. If you right click on the TX or RX antenna button, the dropdowns will allow selection of the appropriate antenna.
The SDRPlay API 3.09 is now required. Please install the latest SDRUno to obtain the drivers.

Fixed:

There were some issues with the Tune button when the KPA1500 was used as well as the KAT500.
The power meter will now update its scale when the radio is in low power mode (0-10w)
The Check for new release now forwards the user to the correct page.
The miniscreen macros were not working
The restore zoom function in the SDRPlay screen was not operational.
When zooming in closer than 192kHz, the audio from the IQ signal was being output to the default audio device.

Win4K4Suite Version 1.06 November 15, 2021

Installation:

If your computer was rebooted, you will need to run the installation of Win4K4Suite again. That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation. You can uninstall previous releases at any time using the Windows control panel.

Fixed:

The KAT KPA screen was not opening on a restart if you have a KPA1500

Win4K4Suite Version 1.05 November 13, 2021

Installation:

If your computer was rebooted, you will need to run the installation of Win4K4Suite again. That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation. You can uninstall previous releases at any time using the Windows control panel.

Fixed:

The power off options of the radio and amp have been corrected when the software closes.
The Vox delay control flickered occasionally.
The Tune button for the KPA1500 was not functional.

Win4K4Suite Version 1.04 November 9, 2021

Installation:

If your computer was rebooted, you will need to run the installation of Win4K4Suite again. That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation. You can uninstall previous releases at any time using the Windows control panel.

Fixed:

The power off options of the radio and amp have been corrected when the software closes.
The Antivox control was replaced with the VOX delay control

Win4K4Suite Version 1.03 October 28, 2021

Installation: As below

Fixed:

Added the missing shutdown of the radio when on a network
Corrected the wrong port number for the radio Ethernet connection.

Win4K4Suite Version 1.02 October 27, 2021

Installation:

If your computer was rebooted, you will need to run the installation of Win4K4Suite again. That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation. You can uninstall previous releases at any time using the Windows control panel.

Fixed:

There was an error connecting to the comport the first time. This has been fixed.

Win4K4Suite Version 1.01 October 27, 2021

Installation:

If your computer was rebooted, you will need to run the installation of Win4K4Suite again. That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation. You can uninstall previous releases at any time using the Windows control panel.

Since WIn4K4Suite is a new program most antivirus software will want to prevent installation. You should turn your antivirus off for the install. In addition, you may get Windows Defender blocking the software. Select More and Install Anyways. If you do not trust it, upload it to VirusTotal.com and put it through all 50+ virus scanners. Ignore the reputation positives.

There is likely to be some small issues and / or improvements needed. Please send all requests to support at va2fsq dot com. There are likely to be many updates over the next couple of months as the radio firmware matures.

Categories

Tags

Archives